Description: MPPT 100A 12V 24V 36V 48V PV MAX 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1300W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2600W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3800W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:5000W MPPT 80A 12V 24V 36V 48V PV MAX 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1000W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2000W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3000W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:4000W MPPT 60A 12V 24V 36V 48V PV MAX 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:750W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1500W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:2250W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3000W MPPT 40A 12V 24V 36V 48V PV MAX 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:500W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1000W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:1500W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:2000W Overview OOYCYOO 100Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 99%. Features MPPT 100A solar charge controller 100% MPPT technology 0 Layer, easy installation, easy setup Built-in DSP controller with high performance Automatic switch for 12V/24V/36V/48V battery bank 3-stage charging optimizes battery performance Overcharge protection, Input PV polarity reverse protection, Output limited current protection, Over-temperature protection Troubleshooting promotion function. Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc Easy to be mounted Datasheet Technical Specification for Selection Guide Models 100A 12V 24V 36V 48V Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 1 2V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V〜DC60V) Soft start time <1S Dynamic response and recovery time >98.1 % (Voc is 1.5 or 2 times than battery, then it's the best efficiency) PV utilization >99% Input specification VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it's the best efficiency.) 12V system (DC20V〜DC96V) 24V system (DC37V-DC96V) 36V system (DC50V〜DC144V) 48V system (DC72V〜DC144V) The maximum PV input voltage (Voc) DC190V(The controller can't work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) The maximum PV input power (The total power rated of PV can't be over this watt that will break the controller.) 12V system (1300W) 24V system (2600W) 36V system (3800W) 48V system (5000W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 100A Temperature Coefficient ±0.02%/ °C Automatic temperature compensation 14.2V-(Max temperature-25 °C)*0.3 Output voltage ripple-peak 100mv Output voltage accuracy <±1% Input Anti-intrusion protection yes Temperature Protection 75°C Temperature increased protection Output power will reduce when it's more than 70 °C Output power will be normal when it's less than 55 °C Fan-on temperature >40 °C Fan-off temperature <35 °C Acoustic noise <40dB Cooling way Forced air cooling Components Imported materials, Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides, and fluorides Security Level Accord to CE, PSE, FCC, EMC, EN60950 Electromagnetic Compatibility Accord to EN6W00, EN55022, EN55024 Enclosure IP21 Net weight(Kg) 3.8 Gross weight(Kg) 4.0 60A MPPT Solar Charge Controller 12V 24V 36V 48V Battery Regulator PV 160V 2800W Multiple Battery Adaptation Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. Max Input Power: DC18V ~ DC72V (12V) 720W DC36V ~ DC108V (24V) 1440W DC54V ~ DC144V (36V) 2160W DC72V ~ DC160V (48V) 2800W Multiple Battery Adaptation Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. Max Input Power: DC18V ~ DC72V (12V) 720W DC36V ~ DC108V (24V) 1440W DC54V ~ DC144V (36V) 2160W DC72V ~ DC160V (48V) 2800W TIPs: Always connect battery first!!! Make sure enough batteries’ voltage let controller recognize the right system voltage. The disassembly sequence is contrary to the wiring order. NEVER connect the solar panel array to the controller without a battery DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller! connect the Inverter directly to the battery. Ensures solar input voltage higher 3V or more than batteries’ voltage and total input power in the range. if input power is too low for max input power, it may be appears to have been discontinued., the charging current almost be zero when controller is floating charge. Parameter Setting Rules：Floating voltage > Low voltage reconnect > Low voltage discharge. The solar controller will stop output when the battery under 10.7V. The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable). Install the Charger controller to the battery as close as possible. Tighten the wire, Carefully read battery manuals before operation. Do NOT let the positive (+) and negative (-) terminals of the battery touch each other. Overview OOYCYOO 60Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 99%. Features MPPT 60A solar charge controller 100% MPPT technology Support charging battery options: Sealed, Gel, Flooded, lead-acid ,AGM ,Lithium ,Lifepo4 0 Layer, easy installation, easy setup Built-in DSP controller with high performance Automatic switch for 12V/24V/36V/48V battery bank 3-stage charging optimizes battery performance Overcharge protection, Input PV polarity reverse protection, Output limited current protection, Over-temperature protection Troubleshooting promotion function. Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc Easy to be mounted Datasheet Technical Specification for Selection Guide Models 60A 12V 24V 36V 48V Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 1 2V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V〜DC60V) Soft start time <1S Dynamic response and recovery time >98.1 % (Voc is 1.5 or 2 times than battery, then it's the best efficiency) PV utilization >99% Input specification VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it's the best efficiency.) 12V system (DC18V〜DC72V) 24V system (DC36V-DC108V) 36V system (DC50V〜DC144V) 48V system (DC72V〜DC160V) The maximum PV input voltage (Voc) DC180V(The controller can't work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) The maximum PV input power (The total power rated of PV can't be over this watt that will break the controller.) 12V system (720W) 24V system (1440W) 36V system (2100W) 48V system (2800W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 60A Temperature Coefficient ±0.02%/ °C Automatic temperature compensation 14.2V-(Max temperature-25 °C)*0.3 Output voltage ripple-peak 100mv Output voltage accuracy <±1% Input Anti-intrusion protection yes Temperature Protection 75°C Temperature increased protection Output power will reduce when it's more than 70 °C Output power will be normal when it's less than 55 °C Fan-on temperature >40 °C Fan-off temperature <35 °C Acoustic noise <40dB Cooling way Forced air cooling Components Imported materials, Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides, and fluorides Security Level Accord to CE, PSE, FCC, EMC, EN60950 Electromagnetic Compatibility Accord to EN6W00, EN55022, EN55024 Enclosure IP21 Net weight(Kg) 1.8 Package Includes 1 x MPPT Solar Charge Controller 1 x English User Manua
Price: 79.99 USD
Location: Hebron, Kentucky
End Time: 2024-11-14T10:58:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: OOYCYOO
Type: Solar Charge Controller
Current Type: DC
Current Output: 100Amps
Features: Corrosion Resistant, Flexible, Freestanding, Indicator Light, LCD Display, LED Indicator, Portable, Temperature Control, Temperature Sensor
Application: Home/Garden
Charging Mode: MPPT (Maximum Power Point Tracking)
Resistance Properties: Corrosion Resistant
Voltage: DC12V 24V 36V 48V
Power: 1300W~5000W
Model: K100A
Current Rating: 100Amps
Power Source: Solar
Country/Region of Manufacture: China
Recommended Environment: Indoor
Pliability: Flexible
Colour: White
Available Variations
Color: 12V 24V 36V 48V 100A 5000W
Price: 199.99 USD
Available Quantity: 5
Quantity Sold: 0
Color: 12V 24V 36V 48V 80A 4000W
Price: 189.99 USD
Available Quantity: 5
Quantity Sold: 0
Color: 12V 24V 36V 48V 60A 3000W
Price: 89.99 USD
Available Quantity: 6
Quantity Sold: 1
Color: 12V 24V 36V 48V 40A 2000W
Price: 79.99 USD
Available Quantity: 5
Quantity Sold: 0
