OConnor 1040 Fluid Head and flowtech 100 Tripod System with Case

Description: OConnor 1040 Fluid Head and flowtech 100 Tripod System with CaseThis System is use just in Our Showroom The OConnor 1040 Fluid Head and flowtech 100 Tripod System with Handle and Case combines the Ultimate 1040 fluid head with the lightweight, carbon fiber flowtech 100 tripod. Supporting up to 45 pounds, this bundle offers speedy setup, a QR plate, and stable support for cine-style digital or smaller ENG cameras. A carry handle and padded ENG bag round out this tripod kit.OConnor Ultimate 1040 Fluid HeadThe OConnor Ultimate 1040 Fluid Head is a lightweight fluid head that shares features with the other fluid heads in the OConnor Ultimate fluid head line. This allows operators to easily transition between lighter and heavier cameras without having to relearn or think about the differences between fluid heads. The head supports 45 pounds' worth of camera and accessories at a center of gravity (COG) 5 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own and helps the camera to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1040 is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1040 extremely versatile and suitable for use with heavy ENG-style cameras all the way down to lightweight cameras, while maintaining the same operational feel. The 1040 features a large Euro-style quick release plate. The QR plate allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and back, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The included pan handle can be attached to either side of the the fluid head, utilizing the mounting rosette on either side of the head.Payload and CounterbalanceThe 1040 supports cameras and accessories up to 45 pounds at a COG of 5 inches. This is what the counterbalance can cancel out while keeping the head neutral in any position in the tilt range. The sinusoidal counterbalance supports lighter cameras and features near-zero balance error. The stepless counterbalance can be set all the way down to zero to accommodate lightweight cameras.Tilt RangeThe 1040 provides a very wide tilt range of 90 degrees forward and and rear tilt, while supporting camera packages weighing up to 45 pounds (5" COG).Pan and Tilt ControlsThe head features independent controls on the pan and tilt for lock and drag. The pan and tilt locks are easy to operate. Both controls match well with the controls of OConnor's larger 2575 and 2065 heads, making it easy for operators to move between the heads without having to relearn each head.Ball LevelingThe included 100mm ball base provides a side support base that easily accommodates the heavy loads this fluid head can support. The ball allows you to quickly level your shot without having to adjust the tripod legs. The ball base is also removable and available options include a Mitchell, 150mm ball base, 4-bolt, 3-bolt, or quickfix.OConnor flowtech 100 Tripod with Attachment MountThe lightweight OConnor flowtech 100 Tripod with Attachment Mount offers notable stability and quick setup and adjustments for payloads up to 66 pounds. The flowtech design features quick release locks at the top of the legs, eliminating the need to stoop while adjusting the tripod height. All three legs can be deployed individually or simultaneously to quickly find their individual levels on uneven ground.The flowtech 100's versatile leg hinges adjust freely and collapse to a transport length of 26.7". Additional ergonomic features include a flat leg design that's more comfortable when carrying it on your shoulder and magnetic locks that neatly snap the legs together for travel. Three handy 3/8"-16 threaded mounts can be used to attach a variety of accessories. Weighing only 7.5 pounds, the flowtech 100 extends to a maximum height of 60". Each leg features a single clamping lever that quickly and easily locks and unlocks the sections. Designed with dual-spiked feet, this 100mm bowl tripod includes an attachment mount and rubber feet that feature a quick release design for easy attaching and removal.SPREADER IS SELL SEPARATEDFeaturesDual-stage, carbon fiber 100mm bowl tripodSupports up to 66 pounds, yet weighs only 7.5 pounds with the included rubber feetHigh torsional stability prevents the legs from twisting when panning your headThe legs feature four locking positions, allowing you to secure the legs without using a spreaderFlat, ergonomic leg design for more comfortable over-the-shoulder carryingDual-spiked feet tripod includes quick release rubber feet for delicate or slippery surfacesMagnetic locks snap the legs together for transport, but easily release for setupAn included attachment mount attaches to one of the threaded accessory holes and is useful for attaching an optional carry strapOConnor Ultimate 1040 Fluid Head SpecsCamera PlateCamera Plate FeaturesQuick ReleaseCamera Plate TypeLarge Euro PlateCamera Mounting Screw2 x 3/8"-16 MaleTripod PlatformCamera Platform AdjustmentYesBase Mount100 mm Half BallPan & TiltDrag ControlTilt: ContinuousPan: ContinuousVertical Tilt+90° to -90°Panning Range360°Independent Pan LockYesIndependent Tilt LockYesPhysicalLoad Capacity0 to 52 lb / 0 to 23.59 kg at CoG 4" / 10.16 cm0 to 45 lb / 0 to 20.41 kg at CoG 5" / 12.7 cm0 to 40 lb / 0 to 18.14 kg at CoG 6" / 15.24 cm0 to 32 lb / 0 to 14.51 kg at CoG 8" / 20.32 cmCounter BalanceContinuous (0 to 45 lb / 0 to 20.41 kg)Center of Gravity4 to 8" / 10.16 to 20.32 cmPan Handle Fittings2 x RosetteBase Diameter3.94" / 100 mmDimensions7.6 x 6.2 x 4.6" / 19.3 x 15.75 x 11.68 cmWeight10.6 lb / 4.81 kgOConnor flowtech 100 Tripod with Attachment Mount SpecsGeneralHead Mount Type100 mm BowlLoad Capacity66.14 lb / 30 kgMaximum Working Height60.24" / 153 cm (without Spreader)Minimum Working Height10.24" / 26 cm (without Spreader)Folded Length26.7" / 67.82 cmMaterialsCarbon FiberAccessory Mounting3 x 3/8"-16 Female ThreadWeight7 lb / 3.18 kg (Legs Alone)LegsLeg Lock TypeLever LockLeg PositionsLocking 4 Positions and Continuously AdjustableIndependent Leg SpreadYesLeg Sections2Feet FeaturesRubber, Removable, Dual SpikedSpreaderMid-Level, Ground (Not Included) Weight2.8 oz / 80 g About usTransFilm is specialized in Sales, Service, Rentals of Camera Support Equipment such as Sachtler, OConnor, Vinten, Cartoni, Miller, Libec, Manfrotto, Arri, Ronford, Anton Bauer, Teradek, SmallHD, Core, IDX, Tiffen, Schneder and more.With more than 30 years experience in camera support systems repair, our business has been providing quality repair service at reasonable rates to Rental Houses, Broadcast Networks, Professionals, Hobbyists and other repair shops since 1987. Unlike others, TransFilm is first and foremost a service facility.Our CompanyBecause we specialize in tripod systems, no one has more experience with servicing your model than TransFilm.comAll TransFilm Sales of Pre-Owned Equipment and Repairs include the checking of all functions and replacement/adjustment of any parts necessary. Products are thoroughly cleaned and tested until they meet factory specifications and are deemed fully functional and comes with 6 Months (Parts & Labor) Limited Warranty, for Normal Use. Service is our primary business, not just an extension of a showroom dealer or rental company.Questions?Comments?Concerns?Call: 818 763-2036 TransFilmWe Deal in Both-New & Used Gear

Price: 10950 USD

Location: Van Nuys, California

End Time: 2024-12-09T22:27:20.000Z

Shipping Cost: 0 USD