PowerMax PMBC 100 Amp 12V Battery Charger/Maintainer, Flash Reprogrammer & Ad...

Description: Provides 100 Amps of clean and reliable power for charging and maintaining a vehicle battery with state-of-charge during service reflash, reprogramming, and complex maintenance or in a showroom where vehicle demonstrations can require significant power from the battery. Allows for vehicles to be displayed with all electrical features and accessories activated for maintaining the battery. Provides a constant clean power supply for using scan tools and reprogramming of ECMs without discharging the battery. Automatically maintains the battery when performing complex mechanical service. Advanced switch-mode design. Provides a cleaner more reliable power source than a standard charger. Fully regulated DC output prevents overcharging of the battery and provides precise control to maintain the necessary battery voltage during complex service and reflash. Quiet small and compact for portability. Multiple protection features for long trouble-free life. Enhanced Reverse Polarity protection plus replaceable fuses. Brownout Input, Over-Current, and Over-Temperature protection: cycle-by-cycle peak-limiting as well as rated current-limiting to maximize the life of the converter. High-quality detachable 15 Foot cables as standard for easy field service. Power Supply Voltage Regulation: 13V to 16.5V. Maximum Amps Output at Regulated Voltage: 100 Amp. Output Voltage Display Screen, On/Off Switch, Removable Cable Set and handle. 🔋 The Power You Need – PowerMax can give some power to your RV, 12V Car Audio/ Stereo/ CV Radio, Boat trolling motors, and LED, and can provide some power to your house, lighting off-grid & solar backup. 12V Battery Charger has a power supply that you could connect to your car, then plug it in and play your car stereo without running the engine. It is rated for 100 amps. 🔋 How to charge a 12-Volt Battery? Connect your 12-volt battery to the battery charger by attaching the BLACK negative cable from your charger to the negative terminal of the 12-volt battery. Make sure to use the clips or clamps to connect to the terminal securely. Generally, the negative terminal is labeled “–“. You also need to connect the positive cable from your charger to the RED positive cable of the battery. You’ll find the “+” mark on the positive terminal. 🔋 AUTOMATIC THERMAL PROTECTION: PowerMax Battery Charger has automatic thermal protection. It can reduce output to safe levels if the unit temperature exceeds safe levels pre-set limits and protects against charger damage due to excessive heat. It automatically reduces the output voltage to prevent overheating and possible damage. Even though there is no risk of overcharging with the use of a high-quality charger, the battery should not remain connected to the charger for more than 24 hours. 🔋 SAFE TO USE: Powermax converter/charger will not boil the battery. It has an Intelligent way to charge & maintain your RV battery and is very easy to install so it’s a free hassle to use. 3-stage charging system built-in dramatically increases battery life for long last usage. Reliable, safe, & clean AC/DC power. It has reverse polarity, Overload & Thermal protection. 55Apm DC Power Output w/ built-in 3 stages smart charger. 🔋 NO NEED TO REWIRE: With no need to re-wire, installation is only 10 minutes! It has an automatic three-stage converter that handles every charging need for the RV, Boat motor and LED, house lighting, and off-grid & solar backup while extending the battery’s life. Well-maintained batteries should never need more than two-stage (normal and trickle) charging. No more flickering lights in our camper.

Price: 548.73 USD

Location: Brentwood, New York

End Time: 2024-12-23T13:47:29.000Z

Shipping Cost: 0 USD